AFP Image Works Film Processor
We feature the MiniMed/90
AFP/ImageWorks’ is setting a new standard for tabletop film processors. These quality x-ray film processors are built and priced to make in-house film developing cost-effective for small offices, clinics, satellite health care facilities, and mobile installations, by including many time, space, and money-saving features found in higher priced models.
Simple operation - just a single switch activates the Mini-Medical. Ease of operation makes the unit simple for all staff members to use
Space-saving size - the Mini-Medical requires a minimum of precious darkroom space; it measures only 33" x 22" x 24" overall, with only a 21" footprint. Processed film exits from the top, back to the operator, allowing the unit to fit handily into smaller spaces
Reliable - the entire drive system is designed to take advantage of AFP's technological advances
- Our tank system features a molded plastic uni-body design
- A capacitor start motor assures quiet and reliable operation
- A worm drive greatly reduces the load on the drive system and extends motor life
- A reliable electromechanical film detector allows the Mini-Medical to accept standard sizes and colors of x -ray film
Features
Built-in quality control - Audible and visual indicators add to operator convenience by signaling when the processor is ready to accept another film
Developer level and temperature indicator- Two separate indicator lights let the operator know the developer solution is at the proper level and that it has reached the optimum temperature for film processing
Constant readiness design - A special "jog" cycle keeps rollers wet while the machine is in standby, thus guaranteeing quality processing throughout the day
Automatic chemical replenisher - An electronic activating system replenishes solutions automatically keeping all chemicals used in the Mini-Medical at peak operating efficiency
Interlocking crossover - Films travel from tank to tank with minimum exposure to air. The tank's new molded plastic uni-body design and the interlocking design of each rack simplify removal
Automatic wash water control - Minimizes the consumption of water by eliminating flow during standby mode. Approximately 1 pint of fresh water is added during each "jog" cycle to eliminate algae problems associated with standing water
Infrared dryer - Energy efficient "I.R. heat lamps" dry each film quickly and quietly. "Pivot-back" dryer rack enables easy access to wash section
Simple installation - The AFP Mini-Medical runs on standard electrical current (115 VAC, 15 A) and requires only a cold water line connection. The unit is UL approved
Automatic standby - During periods of inactivity, the drive motor and pumps shut off automatically reducing energy consumption and mechanical wear. Temperatures are maintained electronically
Light-proof covered feed tray - Reduces time in the dark
Silver recovery connection - Fixer drainage hose fittings are compatible with most standard silver recovery units
Solid state circuitry - Modular, state-of-the-art electronics are designed to assure reliable operation with minimal start-up and reset times. An audible tone alerts operator that processor is ready to accept another film
Options
- All-temp water filter cartridges
- No plumbing conversion kit
- Side plumbing conversion kit
- User parts kit
- Base stand
- 7-gallon replenish tank set
To learn more about how the Mini Med can positively impact your imaging needs please call us at 866-692-1033 or email us at sales@omniimaging.com.
AFP/ImageWorks Film Processor Specifications
| Mini-Medical/90 | Mini-Medical/130 | Mini-Medical/EP | Mini NDT | |
| Developer immersion time | 21 s | 29 s | 44 s | 120 s |
| Processing time (leading edge to leading edge/dry to drop) | 90 s/120 s | 130 s/150 s | 180 s/240 s | 8 min/11 min |
| Production capacity for 14x17 film | 90 films/hour | 60 films/hour | 45films/hour | 20 films/hour |
| Processing speed for 14 x 17 film | 28.5" (72.4 cm) per min | 5.4(13.7cm) per min | ||
| Unit dimensions (L x W x H) | 33" x 22" x 24.5" (83.8 x 55.9 x 62.2 cm) | |||
| Base dimensions (L x W x H) | 21" x 21" x 29" (53.3 x 53.3 x 74 cm) | |||
| Weight (net/with solutions) | 100 lbs. (45.5 kg)/ 150 lbs. (68.2 kg) | |||
| Film sizes | 4 x 4 (minimum) - 14 x 36 (maximum) | |||
| Film types | Standard x-ray film suitable for 90 second processing (RP) | X-ray film suitable for industrial x-ray use | ||
| Tank capacity | 1.9 gal. (7.2 L) each | |||
| Power requirements | 115 VAC, 60 Hz, 15 A 220 VAC, 50 Hz, 7.5 A 220 VAC, 60 Hz, 7.5 A |
|||
| Water consumption | 0.25 gal/min (0.9 L/min) | ¼ gal./min | ||
| Drain requirement | 2 gal/min (7.6 L/min) | |||